time-nuts Digest, Vol 170, Issue 10
(too old to reply)
Dave B via time-nuts
2018-09-06 07:39:24 UTC
Sadly, you'll need more than just a lump of Ferrite to stop 60kHz
escaping to the street via the power cables..

That, and you'll probably also find the home power circuit seriously
polluted anyway around 60kHz, as a result of all the "other stuff" you
have that uses small SMPS's, with little filtering, and very unstable
working frequencies.

Best perhaps to run a horizontal loop around the eve's of the house, and
feed that with 60kHz at low level.  But, I have no idea of whatever
legislation you might bust doing that, depending on where you live.

There are other 60kHz time signals out there already, but it's unlikely
we in the UK will be bothered by you in the US doing local domestic time
signal tricks.


Dave B. (G8KBV)
Subject: Re: [time-nuts] WWVB Translation/Simulation from GPS Data
Content-Type: text/plain; charset="UTF-8"
Could you couple the 60kHz signal into the power line ?
It should conveniently pass around most of the house and some ferrite rings
on the incoming mains minimise what goes outside your premises.
Created on and sent from a Unix like PC running and using free and open source software.

time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.c