Discussion:
5061A #2 smoke escaped
(too old to reply)
Pete Lancashire
2018-06-29 05:52:45 UTC
Permalink
https://photos.app.goo.gl/Cne6YPjv9HTkLf7V7

last video.

-pete
_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
paul swed
2018-06-29 12:18:31 UTC
Permalink
Pete
What happened it just sort of shorted out? I see that the oven appears to
have gone to 0 if I understand the pixs correctly.
Regards
Paul
Post by Pete Lancashire
https://photos.app.goo.gl/Cne6YPjv9HTkLf7V7
last video.
-pete
_______________________________________________
To unsubscribe, go to https://lists.febo.com/cgi-
bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Pete Lancashire
2018-06-29 12:21:28 UTC
Permalink
Yeah when I get up this morning will start taking her apart and see what I
can find.
Post by paul swed
Pete
What happened it just sort of shorted out? I see that the oven appears to
have gone to 0 if I understand the pixs correctly.
Regards
Paul
Post by Pete Lancashire
https://photos.app.goo.gl/Cne6YPjv9HTkLf7V7
last video.
-pete
_______________________________________________
To unsubscribe, go to https://lists.febo.com/cgi-
bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
To unsubscribe, go to
https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
paul swed
2018-06-29 13:12:57 UTC
Permalink
Pete just maybe the oven controller card went.
It would also effect the ionizer and that might explain the I beam jump in
the last seconds.
Soooo the fact that the i beam went up may indicate there are some C's in
reserve.
On Frankenstein I built a new oven controller DC powered and run the tube C
oven hotter. It does let the system work and lock.
The controller was pretty simple.
Regards
Paul
WB8TSL
Post by Pete Lancashire
Yeah when I get up this morning will start taking her apart and see what I
can find.
Post by paul swed
Pete
What happened it just sort of shorted out? I see that the oven appears to
have gone to 0 if I understand the pixs correctly.
Regards
Paul
On Fri, Jun 29, 2018 at 1:52 AM, Pete Lancashire <
Post by Pete Lancashire
https://photos.app.goo.gl/Cne6YPjv9HTkLf7V7
last video.
-pete
_______________________________________________
To unsubscribe, go to https://lists.febo.com/cgi-
bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
To unsubscribe, go to
https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
To unsubscribe, go to https://lists.febo.com/cgi-
bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
paul swed
2018-06-29 15:35:15 UTC
Permalink
Pete
You know that is odd in the fact that the earliest pix of the oven shows 0.
Either its really 0 or seriously hot as the meter drives towards 0 from 50
when cold.
Typically lands about 30.
Post by paul swed
Pete just maybe the oven controller card went.
It would also effect the ionizer and that might explain the I beam jump in
the last seconds.
Soooo the fact that the i beam went up may indicate there are some C's in
reserve.
On Frankenstein I built a new oven controller DC powered and run the tube
C oven hotter. It does let the system work and lock.
The controller was pretty simple.
Regards
Paul
WB8TSL
Post by Pete Lancashire
Yeah when I get up this morning will start taking her apart and see what I
can find.
Post by paul swed
Pete
What happened it just sort of shorted out? I see that the oven appears
to
Post by paul swed
have gone to 0 if I understand the pixs correctly.
Regards
Paul
On Fri, Jun 29, 2018 at 1:52 AM, Pete Lancashire <
Post by Pete Lancashire
https://photos.app.goo.gl/Cne6YPjv9HTkLf7V7
last video.
-pete
_______________________________________________
To unsubscribe, go to https://lists.febo.com/cgi-
bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
To unsubscribe, go to
https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
To unsubscribe, go to https://lists.febo.com/cgi-bin
/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Pete Lancashire
2018-06-29 15:58:58 UTC
Permalink
I shouldn't even be working on it my new tool box is still wrapped in
corrugated and is waiting for somebody to finish it. But I'm going nuts I
have to work on something so if I'm going nuts why not go time nuts :-)
Post by paul swed
Pete
You know that is odd in the fact that the earliest pix of the oven shows 0.
Either its really 0 or seriously hot as the meter drives towards 0 from 50
when cold.
Typically lands about 30.
Post by paul swed
Pete just maybe the oven controller card went.
It would also effect the ionizer and that might explain the I beam jump
in
Post by paul swed
the last seconds.
Soooo the fact that the i beam went up may indicate there are some C's in
reserve.
On Frankenstein I built a new oven controller DC powered and run the tube
C oven hotter. It does let the system work and lock.
The controller was pretty simple.
Regards
Paul
WB8TSL
On Fri, Jun 29, 2018 at 8:21 AM, Pete Lancashire <
Post by Pete Lancashire
Yeah when I get up this morning will start taking her apart and see
what I
Post by paul swed
Post by Pete Lancashire
can find.
Post by paul swed
Pete
What happened it just sort of shorted out? I see that the oven appears
to
Post by paul swed
have gone to 0 if I understand the pixs correctly.
Regards
Paul
On Fri, Jun 29, 2018 at 1:52 AM, Pete Lancashire <
Post by Pete Lancashire
https://photos.app.goo.gl/Cne6YPjv9HTkLf7V7
last video.
-pete
_______________________________________________
To unsubscribe, go to https://lists.febo.com/cgi-
bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
To unsubscribe, go to
https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
To unsubscribe, go to https://lists.febo.com/cgi-bin
/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
To unsubscribe, go to
https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to https://lists.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Loading...