2018-06-03 23:32:28 UTC
I had also modified my HP 53132A but kept it extra simple and the
allows me to use the counter normally..
On my HP 53132A I just mounted a toggle switch in one of the unused holes
the back panel BNC input connectors and wired the switch in series with the
connector. The front panel power/standby switch is unmodified and works as
and if I want to completely power down I can reach around to the back and
added switch to the off position. Much easier than the other modifications
and is easily removable if you want to sell the unit unmodified.
time-nuts mailing list -- email@example.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.