Discussion:
time-nuts Digest, Vol 170, Issue 26
Add Reply
Dave B via time-nuts
2018-09-13 16:35:19 UTC
Reply
Permalink
Raw Message
Hi.

He does answer emails, I just had a similar exchange with him.

If your oscillator runs on a multiple of 25kHz, and cant wander close to
the next multiple, it'll probably work OK, but look at his web-page
before asking.

http://oz5n.dk/   Look at the PDF version, much easier on the eyes.

Regards.

Dave B.  (G0WBX)
Subject: Re: [time-nuts] Looking for a reference oscillator called
XRef-VS made by VK3HZ for TS-2000
Content-Type: text/plain; charset="us-ascii"
Hi Bo,
The AutoPLL does look promising. I think I'll have a discussion with Steen
about my application and perhaps order the unit for testing.
Thank you for your input. Much appreciated.
73
Wayne, WA7NE
--
Created on and sent from a Unix like PC running and using free and open source software.
::

_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts
Andre
2018-09-14 05:50:53 UTC
Reply
Permalink
Raw Message
Hi, am I right in saying that these typically sell for about £80-£160 used?
this one seems to have a lock problem but I am not sure without looking at it.
ebay /itm/273424114165 maybe bad lamp but not totally hopeless if so.
Pretty sure its repairable but need to figure out what parts to buy in advance so that
I have a fair chance of success, even no_lock is useful for certain applications.

I am also wondering if anyone still wants the broken 22 GHz security modules here as they are
otherwise surplus to requirements.

Kind regards, -Andre
#include "firetwinklersandlightballs.h"

________________________________________
From: time-nuts <time-nuts-***@lists.febo.com> on behalf of time-nuts-***@lists.febo.com <time-nuts-***@lists.febo.com>
Sent: 13 September 2018 17:00
To: time-***@lists.febo.com
Subject: time-nuts Digest, Vol 170, Issue 26

Send time-nuts mailing list submissions to
time-***@lists.febo.com

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
or, via email, send a message with subject or body 'help' to
time-nuts-***@lists.febo.com

You can reach the person managing the list at
time-nuts-***@lists.febo.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of time-nuts digest..."


Today's Topics:

1. Re: time-nuts Digest, Vol 170, Issue 25 (Dan Kemppainen)
2. Re: Looking for a reference oscillator called XRef-VS made by
VK3HZ for TS-2000 (Wayne)
3. Re: Looking for a reference oscillator called XRef-VS made by
VK3HZ for TS-2000 (Dave ZL3FJ)


----------------------------------------------------------------------

Message: 1
Date: Wed, 12 Sep 2018 13:51:29 -0400
From: Dan Kemppainen <***@irtelemetrics.com>
To: time-***@lists.febo.com, time-nuts-***@lists.febo.com
Subject: Re: [time-nuts] time-nuts Digest, Vol 170, Issue 25
Message-ID: <4762c49d-5843-be28-17d3-***@irtelemetrics.com>
Content-Type: text/plain; charset=utf-8; format=flowed

Bob,

I think what you want is the SX-Key editor, which includes the compiler
and programmer and help files.

https://www.parallax.com/downloads/sx-key-editor-software

In fact, just earlier today I programmed SX processor on a board...

Dan
Message: 3
Date: Tue, 11 Sep 2018 22:40:08 +0200
Subject: Re: [time-nuts] Loran-C Simulation
Content-Type: text/plain; charset=UTF-8
FWIW there exists an online reference for SX BASIC athttp://www.piclist.com/techref/parallax/sxb/sxb/___index.html which may prove helpful in understanding the SX-B code.
Unfortunately I can not find the SX-B BASIC compiler online anymore.http://www.parallax.com/sx/sxb.asp is 404.
Bob L.
------------------------------

Message: 2
Date: Wed, 12 Sep 2018 16:43:04 -0700
From: "Wayne" <***@splawn.ws>
To: <***@rudius.net>, "'Discussion of precise time and frequency
measurement'" <time-***@lists.febo.com>
Subject: Re: [time-nuts] Looking for a reference oscillator called
XRef-VS made by VK3HZ for TS-2000
Message-ID: <001301d44af2$5d71b0e0$185512a0$@splawn.ws>
Content-Type: text/plain; charset="us-ascii"

Hi Bo,
The AutoPLL does look promising. I think I'll have a discussion with Steen
about my application and perhaps order the unit for testing.
Thank you for your input. Much appreciated.
73
Wayne, WA7NE

-----Original Message-----
From: time-nuts <time-nuts-***@lists.febo.com> On Behalf Of Bo Hansen
Sent: Wednesday, September 12, 2018 1:43 AM
To: time-***@lists.febo.com
Subject: Re: [time-nuts] Looking for a reference oscillator called XRef-VS
made by VK3HZ for TS-2000

Hi Wayne

I am not 100% sure but can you use the this AutoPLL:
<http://oz5n.dk/AUTO-PLL.htm>

Availability: <http://oz5n.dk/>

Bo, OZ2M

_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.




------------------------------

Message: 3
Date: Thu, 13 Sep 2018 22:26:08 +1200
From: "Dave ZL3FJ" <***@silverbears.nz>
To: "'Discussion of precise time and frequency measurement'"
<time-***@lists.febo.com>
Subject: Re: [time-nuts] Looking for a reference oscillator called
XRef-VS made by VK3HZ for TS-2000
Message-ID: <019401d44b4c$2f83c6f0$8e8b54d0$@silverbears.nz>
Content-Type: text/plain; charset="us-ascii"

There's a device- also originating in VK land- in prototype testing phase
at present that is similar to the x-Ref and reputed to be much cheaper. No
idea when it will be available.
73
Dave, ZL3FJ


-----Original Message-----
From: time-nuts [mailto:time-nuts-***@lists.febo.com] On Behalf Of Wayne
Sent: Thursday, September 13, 2018 11:43
To: ***@rudius.net; 'Discussion of precise time and frequency
measurement'
Subject: Re: [time-nuts] Looking for a reference oscillator called XRef-VS
made by VK3HZ for TS-2000

Hi Bo,
The AutoPLL does look promising. I think I'll have a discussion with Steen
about my application and perhaps order the unit for testing.
Thank you for your input. Much appreciated.
73
Wayne, WA7NE

-----Original Message-----
From: time-nuts <time-nuts-***@lists.febo.com> On Behalf Of Bo Hansen
Sent: Wednesday, September 12, 2018 1:43 AM
To: time-***@lists.febo.com
Subject: Re: [time-nuts] Looking for a reference oscillator called XRef-VS
made by VK3HZ for TS-2000

Hi Wayne

I am not 100% sure but can you use the this AutoPLL:
<http://oz5n.dk/AUTO-PLL.htm>

Availability: <http://oz5n.dk/>

Bo, OZ2M

_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.





------------------------------

Subject: Digest Footer

_______________________________________________
time-nuts mailing list
time-***@lists.febo.com
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com


------------------------------

End of time-nuts Digest, Vol 170, Issue 26
******************************************


_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.

Loading...