[time-nuts] 1PPS measurement

[Laurens de Bruijn]

Thanks -

I had to adjust the trigger levels, but now I’m getting some measurements that make sense.

Is it important to bypass the Std (non-stabilised) 53132A internal reference with an accurate 10MHz in order to get good 1PPS jitter measurements (to, say, <50ns)?

The jitter of the Std reference would nevertheless be <<50ns, right?




_______________________________________________
time-nuts mailing list -- time-***@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.